Open as PDF
S Selecting the AF Area and AF PointK
You can manually select the AF point or zone. If 19-point automatic
selection AF + AI Servo AF has been set, you can select any position
where AI Servo AF is to start.
Press the <S> or <B> button
The AF points will be displayed in the
In the Zone AF mode, the selected
zone will be displayed.
Select an AF point.
You can select an AF point by shifting
horizontally with the <6> dial or
vertically with the <5> dial. If you
press <0>, the center AF point (or
center zone) will be selected.
In the Zone AF mode, turning the
<6> or <5> dial will change the
zone in a looping sequence.
You can also select an AF point or
zone by shifting horizontally with the
<Y> <Z> keys or vertically with the
<W> <X> keys.
Selecting the AF Point Manually
When you hold down the <Q> button and turn the <6> dial, you can
select an AF point by shifting vertically.
When you press the <S> or <B> button, the LCD panel displays the
• 19-point automatic selection AF and Zone AF (manual selection of
zone): M AF
• 1 pt AF (Manual selection): SEL N (Center)/SEL AF (Off center)