Open as PDF
The card (sold separately) can be an SD, SDHC, or SDXC memory
card. SDHC and SDXC memory cards with UHS-I can also be used.
The captured images are recorded onto the card.
Make sure the card’s write-protect switch is set upward to
enable writing and erasing.
Open the cover.
Slide the cover as shown by the
arrows to open it.
Insert the card.
As shown by the illustration, face
the card’s label side toward you
and insert it until it clicks in place.
Close the cover.
Close the cover and slide it in the
direction shown by the arrows until it
When you set the power switch to
<1>, the number of possible shots
will be displayed on the LCD panel.
Installing and Removing the Card
Installing the Card
The number of possible shots depends on the remaining capacity of the
card, image-recording quality, ISO speed, etc.
Setting [z1: Release shutter without card] to [Disable] will prevent
you from shooting without a card inserted (p.272).