Open as PDF
Using AF to Focus (AF Method)
The camera focuses with a single AF point. This is effective when you
want to focus on a particular subject.
Display the Live View image.
Press the <A> button.
The Live View image will appear on
the LCD monitor.
The AF point < > will appear.
During movie shooting, if [Movie
Servo AF] is set to [Enable], the AF
point will be displayed in a larger size.
Move the AF point.
Press the <W> <X> or <Y> <Z>
keys to move the AF point to where
you want to focus. (It cannot go to the
edge of the screen.)
> or the <
> button will
return the AF point to the screen’s center.
You can also tap on the LCD monitor
screen to move the AF point.
Focus on the subject.
Aim the AF point over the subject and
press the shutter button halfway.
When focus is achieved, the AF point will
turn green and the beeper will sound.
If focus is not achieved, the AF point
will turn orange.
Take the picture.
Check the focus and exposure, then
press the shutter button completely to
take the picture (p.202).
FlexiZone - Single: