Open as PDF
Just by tapping on the LCD monitor screen, you can focus and take the
picture automatically. This works in all shooting modes.
Display the Live View image.
Press the <A> button.
The Live View image will appear on
the LCD monitor.
Enable the touch shutter.
Tap [y] on the screen’s bottom left.
Each time you tap on the icon, it will
toggle between [y] and [x].
[x] (Touch shutter: Enable)
You can tap on the spot to focus and
[y] (Touch shutter: Disable)
You can tap on the spot to select
where you want to focus. Press the
shutter button completely to take the
Tap on the screen to shoot.
Tap on the face or subject on the
On the point you tap, the camera will
focus in the AF method that was set
(p.218-222). When [FlexiZone -
Multi] is set, it will switch to
[FlexiZone - Single].
When focus is achieved, the AF point
turns green and the picture is taken
If focus is not achieved, the AF point
turns orange and the picture cannot
be taken. Tap on the face or subject
on the screen again.
x Shooting with the Touch Shutter