Filter
Top Products
3 Setting the FlashK
188
The Custom Functions displayed under [External flash C.Fn setting]
vary depending on the Speedlite model.
1
Display the Custom Function.
With the camera ready to shoot with
an external Speedlite, select
[External flash C.Fn setting], then
press <0>.
2
Set the Custom Function.
Press the <
Y
> <
Z
> keys to select the
function number, then set the function.
The procedure is the same as setting the
camera’s Custom Functions (p.350).
1
Select [Clear settings].
Under the [z1: Flash control] tab,
select [Clear settings], then press
<0>.
2
Select the settings to be cleared.
Select [
Clear built-in flash set.
],
[
Clear external flash set.
], or [
Clear
ext. flash C.Fn set.
], then press <
0
>.
When you select [OK], the respective
flash settings will be cleared.
Setting the External Speedlite Custom Functions
Clearing the Settings
With an EX-series Speedlite, if the [
Flash metering mode]
Custom Function is
set to [
TTL flash metering
] (autoflash), the Speedlite will always fire at full output.
The Speedlite’s Personal Function (P.Fn) cannot be set or canceled with the
camera’s [Flash control] screen. Set it with the Speedlite.