Filter
Top Products
217
Changing the Autofocus OperationK
Suited for still subjects. When you press the shutter button
halfway, the camera will focus only once.
When focus is achieved, the AF point will turn green and the beeper
will sound.
While you hold down the shutter button halfway, the focus will be
locked. You can then recompose the shot if desired.
This AF operation is suited for moving subjects. While you hold
down the shutter button halfway, the camera will keep focusing on
the subject continuously.
The exposure is set at the moment the picture is taken.
The continuous shooting speed becomes slower since the camera
keeps focusing and shooting continuously.
Setting the [AF method] to [FlexiZone - Single] is recommended.
Depending on the shooting conditions, it may take a moment until
the shutter is released.
Depending on the lens used, the distance to the subject and the
subject’s speed, the camera may not be able to achieve correct
focus.
If you operate the zoom during continuous shooting, the focus may
be lost. Shoot after using the zoom to obtain the desired
composition.
When focus is achieved, the AF point will turn blue.
One-Shot AF for Still Subjects
Servo AF for Moving Subjects
If [z1: Beep] is set to [Disable], the beeper will not sound when focus
is achieved.
During continuous shooting, the exposure set for the first shot will also
be applied to the subsequent shots.
With Servo AF, the beeper will not sound even when focus is achieved.