Open as PDF
u Adjusting the Color Tone for the Light SourceK
With just one shot, three images with different color tones can be
recorded simultaneously. Based on the color temperature of the current
white balance setting, the image will be bracketed with a blue/amber
bias or magenta/green bias. This is called white balance bracketing
(WB Bkt.). White balance bracketing is possible up to ±3 levels in
Set the white balance bracketing amount.
In step 2 for “White Balance
Correction”, when you turn the <5>
dial, the “ ” mark on the screen will
change to “ ” (3 points).
Turning the dial to the right sets the B/
A bracketing, and turning it to the left
sets the M/G bracketing.
On the right, “Bracket” indicates the
bracketing direction and correction amount.
Pressing the <L> button will cancel
all the [WB Shift/Bkt.] settings.
Press <0> to exit the setting and
return to the menu.
The images will be bracketed in the following sequence: 1. Standard
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard
white balance, 2. Magenta (M) bias, and 3. Green (G) bias.
White Balance Auto Bracketing
B/A bias ±3 levels
During WB bracketing, the maximum burst for continuous shooting will be
lower and the number of possible shots will also decrease to approx. one-
third the normal number.
You can also set white balance correction and AEB together with white
balance bracketing. If you set AEB in combination with white balance
bracketing, a total of nine images will be recorded for a single shot.
Since three images are recorded for one shot, it takes longer to record
the image on the card.
During Live View shooting or movie shooting, the white balance icon will blink.
“Bkt” stands for bracketing.