Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install Management Terminal and Activate System
Page 3-6Install Management Terminal
3
Remotely Connect Terminal
A management terminal can be installed at some distance from the system.
Typical remote connections are shown in Figure 3-5
.
Figure 3-5. Typical Connections to Remote Devices
1. Use Z3A2 Asynchronous Data Units (ADUs) and M25A cables on
CDRU/CAS+, PMS, SAT PC, BCMS terminal, and Remote SAT.
2. Use Z3A1 ADUs and M25B cables on System/Journal printers.
3. A TN556 ISDN BRI circuit pack is used with the 7500 Data Module.
Figure Notes
1. Compact Modular Cabinet (Slot 1)
2. DCE Connector (RS-232)
3. M25B (25-Pin-to-RS-232) Cable
4. Main Distribution Frame (MDF)
5. Public Switched Telephone Network
(PSTN)
6. 103A or Modular Wall Jack
7. Line Cord
8. Remote Modem
9. DB9 to DB25 Converter (ED3-1-70,
G115) (optional) to connect to PC
10. Remote Management Terminal or
PC
11. Remote Location