Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install Management Terminal and Activate System
Page 3-11System Administration
3
System Administration
NOTE:
An “init” login is required to perform the following. Contact the regional
CSA (Customer Software Associate) to assign the Offer Category option.
Maintenance capabilities to initialize the system and access to either an
internal or external modem are the only command options available until
the Offer Category option is set.
Log in to the System
1. Verify the screen displays: Login:
2. Type craft and press
Enter.
3. Verify the screen displays: password:
4. Type crftpw and press
Enter. For security reasons, the password does not
display as it is typed. The system verifies a valid login and password name
were entered. If an invalid login or password name was entered, the
screen displays:
login incorrect:
In this case, repeat the procedure using the correct login and matching
password.
If the system recognizes the login and password name, the screen
displays the software version.
5. Verify the screen display is similar to:
Terminal Type (513, 715, 4410, 4425, VT220): [513]
6. Type the number of the management terminal and press
Enter.
7. Verify the screen displays: Command:
NOTE:
The following sections describe some of the procedures used to access
and change certain options. These sections are not intended to replace or
modify the instructions provided in
DEFINITY Enterprise Communications
Server Release 6 Administration and Feature Description
.