Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install and Wire Telephones and Other Equipment
Page 5-121Add ISDN—BRI
5
Add ISDN—BRI
Service Interruption
1. Since, if the packet bus is being added, the addition of ISDN—BRI
requires a service interruption, notify the customer in advance as to when
the addition will take place.
Disable Alarm Origination
1. Enter change system-parameters maintenance and press Enter.
2. Set the Alarm Origination Activated field to n.
!
CAUTION:
If you do not disable Alarm Origination, the system may generate
alarms, resulting in unnecessary trouble tickets.
3. For some releases of system software, disable Cleared Alarm
Notification and Restart Notification before submitting the
form.
Save Translations
1. If the system is high or critical reliability, enter status system 1 and press
Enter to verify that the system is in the “active/standby” mode.
2. Enter save translation and press E
nter. This instructs the system to take all
translation information in memory and write it to the translation card or
tape.
3. If the system contains a TN750 Announcement circuit pack, enter display
announcements and press
Enter.
If administered recorded announcements are listed, enter list
configuration software-version and press
Enter. Check Page 2 of this
form to see when the announcements were last saved. To save the
announcements, enter save announcements and press
Enter.
Power Down System
1. If the packet bus is being added, set the main circuit breaker to OFF.