Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install and Wire Telephones and Other Equipment
Page 5-78Add the Fiber Optic Cable
5
Figure 5-34. Insert the Pass-thru Tool
!
CAUTION:
Avoid bending fiber optic cables to a radius smaller than 1.5 inches
(3.8 cm), to prevent mechanical stress on the cables.
!
CAUTION:
During the actual installation of fiber optic components, use either all beige
or all blue adapters. Beige denotes multimode fiber and blue denotes
single-mode fiber. Do not mix beige with blue.
3. Attach the supplied fiber optic cable to the adapter.
lcda2fopRPY021098