Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install and Wire Telephones and Other Equipment
Page 5-105Add External Modem to TN1648B
5
10. Connect the cable to the front of the TN1648B circuit pack as shown in
Figure 5-52
.
NOTE:
Dress the cable straight down the front of the circuit pack. Do not
allow the cable to cross in front of another circuit pack.
Figure 5-52. Connect the Cable to the Circuit Pack
11. Close the front door.
12. Discard the pass-thru tool.
Test the Installation
1. Login to the management terminal.
2. Administer the system by referring to the
Installation and Test for Adjuncts
and Peripherals, 555-230-125
.
3. Enter list configuration all to determine if the new circuit pack appears in
the correct slot and that there are no circuit pack conflicts.
prda0007RPY 021698