Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Cable Ductwork
Page C-17
C
Install AC Power Duct
Refer to Figure C-12 and assemble the ductwork:
1. Hang AC power duct (group 12 through 16 and 21) on back of shielded
duct and anchor in place using one thread-forming screw at each cabinet.
2. If required, slide utility outlet assembly (part of group 18) into the duct from
the end.
3. Repeat steps 1 and 2 for each cabinet.
4. Interconnect ducts with couplings using four round-head machine screws.
5. Insert 4 wire holders into each duct spaced evenly along duct.
6. If equipped with an AC outlet, snap two group 18 raceway covers into
place onto the AC power ducts.
7. If not equipped with an AC outlet, snap a group 17 raceway cover into
place onto the AC power ducts.
8. If required, attach group 19 (combination end cap) by using two round
head machine screws.
9. Assemble the ladder rack as shown in Figure C-13 on page C-19
.