Lucent Technologies Release 6 Security Camera User Manual


 
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install and Wire Telephones and Other Equipment
Page 5-44External Ringing
5
External Ringing
Connections for external ringing provided by a device, such as a gong, chime, or
bell, are at an information outlet. The system side of the MDF connects to a
TN2183 or equivalent analog line circuit pack located in a port carrier. The circuit
packs contain 16 ports each.
NOTE:
A maximum of 3 devices can connect to 1 TN2183 circuit pack port.
1. Wire the ringing device to the information outlet as shown in Figure 5-8
and Figure 5-9
.
2. Administer per
DEFINITY Enterprise Communications Server Release 6
Administration and Feature Description
.
Queue Warning Indicator
The connections for the queue warning indicator are the same as external
ringing. An AC indicator (lamp) such as a 21C49 can be used in a Uniform Call
Distribution/Direct Departmental Calling (UCD/DDC) queue.
The lamp connects to an information outlet. The system side of the MDF
connects to an analog line circuit pack in a port carrier.
1. Wire the queue warning indicator to the information outlet as shown in
Figure 5-8
and Figure 5-9.
2. Administer per
DEFINITY Enterprise Communications Server Release 6
Administration and Feature Description
.