Lucent Technologies Release 6 Security Camera User Manual


 
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install and Wire Telephones and Other Equipment
Page 5-72Add the Fiber Optic Cable
5
LASER Product
The DEFINITY ECS may contain a Class 1 LASER device if single-mode fiber
optic cable is connected to a remote Expansion Port Network (EPN). The LASER
device operates within the following parameters:
Maximum Power Output: -5dBm
Wavelength: 1310 nm
Mode Field Diameter: 8.8 microns
CLASS 1 LASER PRODUCT
IEC 825 1993
!
CAUTION:
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Contact your Lucent Technologies representative for more information.
Cabinet Preparation
1. Open the front door.
NOTE:
Administration may be required before removing the circuit pack in
the following step.
Table 5-17.
Quantity Description Comcode
1 Pass-thru Tool 847978715
1 Beige SC-SC Fiber Optic Adapter (multimode) 107118903
1 Beige ST-SC Fiber Optic Adapter (multimode) 107087967
1 Ten-foot (3 m) Fiber Optic Cable (multimode) 107122640
1 I/O Connector Adapter Bracket 847978673
1 Fiber Optic Cable Disconnect Label 848029286
10 Cable Ties 407814672
6 Cable Tie Mounts 403053150