Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install Management Terminal and Activate System
Page 3-19Administer System Configurations (Release 6r)
3
Administer System Configurations
(Release 6r)
If a Release 6si is installed, skip to ‘‘Administer Attendant Console’’ on page 3-29.
Change Customer Options
The following features are part of the basic software package and do not need to
be activated. They default to y (yes) on the Optional Features Form.
■ Automatic Route Selection/Automatic Alternate Routing Partitioning
■ Emergency Access to the Attendant
■ Hospitality
■ Service Observing
An “init” password is required to modify customer options. Contact your regional
CSA for the password.
Use the following procedure to change the customer’s optional features.
1. At the Command: prompt, enter the change system-parameters
customer-options command. A display similar to Screen 3-6
appears.