Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Connecting Fiber Optic Cables
Page A-12Optical Cross-Connect Hardware
A
10A and 1000ST Lightguide Coupling Panel
The 10A Lightguide Coupling Panel mounts in the cutouts of a 100A LIU and a
200A LIU. A 100A LIU requires 2 coupling panels. A 200A requires 4 coupling
panels. Each panel can hold 6 connector couplings. A connection to an ST
coupler is shown in Figure A-5
.
NOTE:
If you are not viewing this book on CD-ROM, the fiber cable shown in Figure
A-5 is yellow, denoting single-mode fiber.
The 1000ST Lightguide Coupling Panel mounts in the cutouts of a 400A LIU. A
400A LIU requires 8 coupling panels. Each coupling panel can hold 6 connector
couplings.
Figure A-5. 10A and 1000ST Lightguide Connector Coupling
The C2000A-2 Connector Coupling joins multi-mode fiber optic cables equipped
with ST connectors. It has a threaded midsection that allows it to be secured to
the 10A or 1000ST Lightguide Coupling Panel.
The C3000A-2 Connector Coupling joins single-mode fiber optic cables
equipped with ST connectors. It has a threaded midsection that allows it to be
secured to the 10A or 100ST Lightguide Coupling Panel.