Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Cable Ductwork
Page C-15
C
Install I/O Cable Rack Coupling
1. Attach I/O trough to top of cabinet using thread-forming screws. See
Figure C-10
.
2. Attach cross-aisle bracket to I/O trough using thread-forming screws
through the top three holes on the bracket’s 6-hole face.
3. Attach I/O coupling trough to cross-aisle bracket using thread-forming
screws.
4. Attach cable rack to coupling trough using locally-provided coupling
plates and 3/8-18 x 1/2 inch hex head bolts with nuts.
5. Attach other end of cable rack to wall using locally-provided hardware.
Figure C-10. Installation of I/O Cable Rack Coupling to Rear of Cabinet
Figure Notes
1. Cross-Aisle Bracket
2. Coupling Plate
3. Cable Rack
4. I/O Coupling Trough
5. I/O Trough
6. Use Only When Required
7. To Wall
duct6KLC071796