Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Test Telephones and Other Equipment
Page 6-2Make Test Calls
6
Make Test Calls
Make 2 calls from 1 telephone to another telephone. Make the first call by dialing
a telephone and make the second call by dialing a trunk access code and a
Listed Directory Number (LDN).
Test 302C Attendant Console
Check all lamps are operational and call another telephone in the system.
1. Simultaneously press and hold the Ringer Volume up button and the POS
BUSY button. This puts the console in the self-test mode.
NOTE:
Releasing the buttons causes the console to return to normal mode.
2. Verify all lamps on display light and remain lighted. Each row of lamps on
the console lights and goes dark in sequence from top to bottom.
3. Press Start. Listen for dial tone. The green lamp associated with idle call
appearance button lights. The Position Available lamp goes dark.
4. Dial number associated with a working telephone. Audible ringing tone is
heard in ear piece.
5. Press Release. Audible ringing tone is silenced. The green lamp
associated with idle call appearance button goes dark. The Position
Available lamp lights.
Test Selector Console
Check all selector console lamps are operational. Make call to a telephone in the
system.
1. Simultaneously press and hold the Ringer Volume up button and the POS
BUSY button on the attendant console. This puts the console in the
self-test mode.
2. Each row of lamps on the selector console lights and goes dark in
sequence from top to bottom.
3. Press hundreds group select button. The hundreds group select lamp
lights and any lamps associated with busy telephone light.
4. Press Direct Extension Selection (DXS) button for the desired extension.
Audible ringing tone is heard in the earpiece on attendant console.
5. On attendant console, press Release. Audible ringing tone is silenced.