Lucent Technologies Release 6 Security Camera User Manual


 
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install and Wire Telephones and Other Equipment
Page 5-139CAMA/E911 Installation
5
24. At the prompt, type change route-pattern <number> (the route pattern to
be changed; in the example above, the route pattern is 11) and press
Enter.
Screen 5-6. Route Pattern form (Page 1)
25. On the Route Pattern screen, in Grp. No. field, enter the CAMA trunk
group number.
26. In the FRL field, enter 0.
NOTE:
For the following step, if the Central Office (CO) wants KP11ST as
the dialed digit string, then leave blank. If the CO wants KP911ST,
then insert a “9” in the Inserted Digits field.
27. Administer the Inserted Digits field if needed and press
Enter.
28. At the prompt, type change route-pattern <number> (the route pattern to
be changed; in the example above, the route pattern is 12) and press
Enter.
Page 1 of X
Pattern Number: 11
Grp. FRL NPA Pfx Hop Toll No. Del Inserted IXC
No. Mrk Lmt List Digits Digits
1: 1__ 0 ___ _ __ __ __ ____________________________________ user
2: ___ _ ___ _ __ __ __ ____________________________________ user
3: ___ _ ___ _ __ __ __ ____________________________________ user
4: ___ _ ___ _ __ __ __ ____________________________________ user
5: ___ _ ___ _ __ __ __ ____________________________________ user
6: ___ _ ___ _ __ __ __ ____________________________________ user
BCC VALUE TSC CA-TSC ITC BCIE Service/Feature Numbering LAR
0 1 2 3 4 W Request Format
1: y y y y y n y none_____ both ept outwats-bnd____ BAND: ___ ________ none
2: y y y y y n n rest _______________ ________ next
3: y y y y y n n rest _______________ ________ rehu
4: y y y y y n n rest _______________ ________ none
5: y y y y y n n rest _______________ ________ none
6: y y y y y n n rest _______________ ________ none