Filter
Top Products
Install and Connect Cabinets
Page 1-1Unpack and Inspect Cabinets
1
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
1
1
Install and Connect Cabinets
This chapter discusses installation of Multi-Carrier Cabinets only. For information
on Single-Carrier Cabinets, refer to
DEFINITY Enterprise Communications Server
Release 5 Installation and Test for Single-Carrier Cabinets
.
Floor plans and equipment layouts for typical system installations are provided in
DEFINITY Enterprise Communications Server Release 6 System Description
Pocket Reference
.
Unpack and Inspect Cabinets
Perform these steps for all cabinets.
!
DANGER:
A cabinet may weigh as much as 800 lbs (363 kg) and may be top heavy.
Use extreme caution.
1. Check the status of the SHOCKWATCH and/or TILTWATCH indicators on
the container. If the container has been shaken or tilted beyond
specifications, the indicators are red, indicating potential damage. Report
any damage according to local shipping instructions.
!
DANGER:
Take care to avoid injury while cutting and removing the 2 metal bands.
2. Unpack the cabinet and remove all packing material.
3. Move the cabinets into their proper positions.
4. Do not adjust the leveling feet at this time.