Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Cable Ductwork
Page C-3
C
Installation
This ductwork consists of ED-1E465 group numbers (facia paneling to cover the
I/O ducts is assembled from ED-1E464). The group numbers match those in the
Customer Service Document (CSD) and floor plan layout.
Inventory the materials received and mark a copy of the floor plan with the
location of each group number to be installed. Hardware used to assemble each
item is packaged with the individual groups.
Tab le C-1
shows the available group numbers and a brief description of each
group. Some ducts are equipped with covers which should be stored until all
cabling is completed. When storing, tag the covers with their associated group
numbers for ease in identification.
Table C-1. ED-1E465 Group Numbers and Descriptions
Group Description
6 Rear or front end plate for I/O ductwork
8 I/O cable rack coupling to rear of cabinet
9 I/O cable rack riser to side of cabinet
10 I/O cross-aisle ductwork
12 AC power duct
13 AC power duct with one 3-wire twist-lock receptacle (right side)
14 AC power duct with one 3-wire twist-lock receptacle (left side)
15 AC power duct with two 3-wire twist-lock receptacles (right side)
16 AC power duct with four 3-wire twist-lock receptacles (left side)
17 Raceway cover
18 Raceway cover with utility outlet
19 AC power duct combination end
21 AC power duct with one 4-wire twist-lock receptacle (right side)
22 I/O duct-side of cabinet to wall (43 inch (109.2 cm ) aisle)
23 I/O duct-side of cabinet to wall over one cabinet
24 I/O duct-side of cabinet to wall over two cabinets
25 I/O duct-side of cabinets to wall over three cabinets
26 I/O duct-rear of cabinet to wall (43 inch (109.2 cm ) aisle)
27 Transition between older DIMENSION system-type cabinet and new DEFINITY
system cabinets for shielded cable ducts
Continued on next page