Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Test Telephones and Other Equipment
Page 6-3Test External Ringing
6
Test External Ringing
Make a test call to the attendant console to verify ringing device sounds when the
Night lamp on console is lighted. If ringing device has not been installed by
customer, connect spare telephone to information outlet reserved for ringing
device and make test call.
Test Queue Warning Indicator
Make a test call to an extension associated with a Uniform Call Distribution (UCD)
or Direct Department Calling (DDC) group, and verify the queue warning
indicator lamp lights. If the queue warning indicator has not been installed by
customer, connect a spare telephone to the information outlet reserved for queue
warning indicator and make a test call.
Test Integrated Announcement
The TN750/B/C Announcement circuit pack provides the ability to store
messages. The messages can be recorded from telephones on- or off-premises
and have flexible message lengths. The telephone selected as the test telephone
must have a class of service (COS) with console permission enabled.
Record Announcement
1. Select test telephone with console permission enabled.
2. Dial the access code followed by the integrated announcement extension
number. Dial tone is heard.
3. Dial “1.” A short burst of tone is heard and recording begins. Speak the
announcement into the telephone.
4. Dial “#” or hang up. Recording stops and dial tone is heard.
Playback Announcement
1. Dial access code followed by the integrated announcement extension
number. Dial tone is heard.
2. Dial “2.” The announcement is heard and dial tone is heard at completion
of announcement.
Delete Announcement
1. Dial access code followed by the integrated announcement extension
number. Dial tone is heard.
2. Dial “3.” A confirmation tone is heard and announcement is deleted.