Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install and Wire Telephones and Other Equipment
Page 5-81Add the Fiber Optic Cable
5
Figure 5-37. Cable Disconnect Label
11. Close the rear door.
!
CAUTION:
Avoid bending fiber optic cables to a radius smaller than 1.5 inches
(3.8 cm), to prevent mechanical stress on the cables. Plan the use of
cable ties to avoid crimping the cable or creating a fixed stress point
where, at a later time, movement of the cable causes it to exceed the
minimum bend radius.
!
CAUTION:
Be careful not to crimp the fiber cable when you are performing the
following step.
12. Replace the fan cover. See Figure 5-38.
Figure Notes
1. To outside plant fiber
prda0001 RPY 021898
1