Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install and Wire Telephones and Other Equipment
Page 5-112Add ISDN — PRI
5
Enter Added Translations
1. Administer the forms listed under “Integrated Services Digital Network —
Primary Rate Interface” in
DEFINITY Enterprise Communications Server
Release 6 Administration and Feature Description
.
Resolve Alarms
1. Examine the alarm log. Resolve any alarms that may exist using
DEFINITY
Enterprise Communications Server Release 6 Maintenance R6vs/si
.
Contact INADS to Enable Customer Options and
Verify Alarm Origination
Be sure the system is part of the existing INADS database by calling the INADS
Database Administrator at the Technical Service Center (TSC). Verify that INADS
can dial into the system and that the system can dial out to INADS.
As part of the system registration process, the INADS Database Administrator
enables Alarm Origination and enables customer options.
!
CAUTION:
If you do not enable Alarm Origination when the customer has purchased a
services contract, the system cannot report any alarm to the TSC
automatically, causing the TSC to be unable to fulfill the services contract.
Save Translations
1. If the system is high or critical reliability, enter status system 1 and press
Enter to verify that the system is in the “active/standby” mode.
2. Enter save translation and press
Enter. This instructs the system to take all
translation information in memory and write it to the translation memory
card or the tape.
3. If the system contains a TN750 Announcement circuit pack, enter list
configuration software-version and press
Enter. If Page 2 of this form
shows that recorded announcements were saved, these announcements
can be restored using restore announcements and press
Enter.
4. Update backup tape, if necessary.