Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install and Wire Telephones and Other Equipment
Page 5-87Add Tie Trunks
5
Add Tie Trunks
Requirements
Each tie trunk connects to 1 port of a 4-port TN760 or to an assortment of
non-United States tie trunk circuit packs.
Installation
1. Determine the port assignment of the trunk from Trunk Group form.
2. Install a TN760 or a non-United States tie trunk circuit pack in the
assigned carrier slot (if an additional circuit pack is required).
3. For customer-owned (not leased) tie-trunk facilities (such as campus
environments), TN760 circuit packs provide signaling capabilities beyond
those specified by the industry-wide E & M standard. Use Figure 5-41
and
Table 5-18
to choose the preferred signaling format, set switches on the
TN760 circuit pack, and administer the port.
4. Administer forms listed under “Tie Trunk Group” in
DEFINITY Enterprise
Communications Server Release 6 Administration and Feature
Description
.
Port Number 3 A 02 01
Cabinet Carrier Slot Circuit
(Port Network) (or Single-Carrier
Cabinet)