Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install Management Terminal and Activate System
Page 3-12Set Country Options
3
Set Country Options
Certain country options need to be set to turn red failure indication LEDs off.
1. Verify the screen displays: Command:
2. Type change system-parameters country options and press
Enter.
A screen similar to Screen 3-2 is displayed on the terminal. The cursor is
set on the Companding Mode line.
Screen 3-2. Typical System Parameters Country-Options Screen
3. The default companding mode is µ-Law. If the country uses A-Law
companding, type A-Law.
4. Press
Enter when this information is correct.
Other items eventually need to be entered on this screen, but this is all that
must be done to turn the red alarm LEDs off. Refer to Table 3-1
for a list of
the country codes.