Filter
Top Products
Epson Research and Development Page 125
Vancouver Design Center
Hardware Functional Specification S1D13708
Issue Date: 02/03/07 X39A-A-001-02
bits 7-2 LUT Green Read Data Bits [5:0]
This register contains the data from the green component of the Look-Up Table. The LUT
entry read is controlled by the LUT Read Address Register (REG[0Fh]). This is a read-
only register.
bits 7-2 LUT Red Read Data Bits [5:0]
This register contains the data from the red component of the Look-Up Table. The LUT
entry read is controlled by the LUT Read Address Register (REG[0Fh]). This is a read-
only register.
bits 7-0 LUT Read Address Bits [7:0]
This register forms a pointer into the Look-Up Table (LUT) which is used to read LUT
data and store it in REG[0Ch], REG[0Dh], REG[0Eh]. This is a write-only register and
returns 00h if read.
Note
The S1D13708 has three 256-position, 6-bit wide LUTs, one for each of red, green, and
blue (see Section 11, “Look-Up Table Architecture” on page 173).
Look-Up Table Green Read Data Register
REG[0Dh] Read Only
LUT Green Read Data Bits 5-0 n/a
7654321 0
Look-Up Table Red Read Data Register
REG[0Eh] Read Only
LUT Red Read Data Bits 5-0 n/a
7654321 0
Look-Up Table Read Address Register
REG[0Fh] Write Only
LUT Read Address Bits 7-0
76543210