A SERVICE OF

logo

Open as PDF
next previous
Epson Research and Development Page 199
Vancouver Design Center
Hardware Functional Specification S1D13708
Issue Date: 02/03/07 X39A-A-001-02
burst memory accesses. For byte accesses, the Memory Address Pointer registers
(REG[C0h], REG[C1h], REG[C2h]) are automatically incremented “+1”. For word
accesses, the Memory Address Pointer registers are automatically incremented “+2”.
Note
If the Memory Access Select bit is enabled (REG[C6h] bit 0 = 1), all memory accesses
are word accesses (EBU is ignored). Therefore, the memory address set in REG[C0h]
through REG[C2h] must be an even address.
Register access still uses EBU irrespective of REG[C6] bit 0 value.