Filter
Top Products
Page 18 Epson Research and Development
Vancouver Design Center
S1D13708 13708CFG Configuration Program
X39A-B-001-01 Issue Date: 01/11/16
Panel Power Tab
The S5U13708B00B evaluation board is designed to use the GPO0 signal to control the
LCD bias power. The following settings configure panel power support.
Power Down Time Delay This setting controls the minimum time delay between
when the LCD panel is powered-off and when the
S1D13708 control signals are turned off. This setting
must be configured according to the specification for
the panel being used.
This value is used by Epson evaluation software
designed for the S5U13708B00B evaluation board.
Power Up Time Delay This setting controls the maximum time delay between
when the S1D13708 control signals are turned on and
the LCD panel is powered-on. This setting must be
configured according to the specification for the panel
being used.
This value is used by Epson evaluation software
designed for the S5U13708B00B evaluation board.
Power Down
Time Delay
Power Up
Time Delay