Filter
Top Products
Page 22 Epson Research and Development
Vancouver Design Center
S1D13708 13708CFG Configuration Program
X39A-B-001-01 Issue Date: 01/11/16
From the Menu Bar, select “File”, then “Configure Multiple” to display the Configure
Multiple Dialog Box. This dialog box is also displayed when a file(s) is dragged onto the
13708CFG window.
The left pane lists files available for configuration; the right pane lists files that have been
selected for configuration. Files can be selected by clicking the “Add” or “Add All”
buttons, double clicking any file in the left pane, or by dragging the file(s) from Windows
Explorer.
Selecting “Show all files” displays all files in the selected directory, whereas selecting
“Show conf. files only” will display only files that can be configured using 13708CFG (i.e.
.exe, .elf, .s9, .s19, .idp, .lvb).
Checking “Preserve Physical Addresses” instructs 13708CFG to use the register and
display buffer address values the files were previously configured with. Addresses
specified in the General Tab are discarded. This is useful when configuring several
programs for various hardware platforms at the same time. For example, if configuring PCI
and S19 files at the same time for a new panel type, the physical addresses for each are
retained. This feature is primarily intended for the test lab where multiple hardware config-
urations exist and are being tested.