Filter
Top Products
Page 12 Epson Research and Development
Vancouver Design Center
S1D13708 Interfacing to the Motorola MC68VZ328 Dragonball Microprocessor
X39A-G-016-01 Issue Date: 01/11/25
4.2 S1D13708 Hardware Configuration
The S1D13708 uses CNF7 through CNF0 to allow selection of the bus mode and other
configuration data on the rising edge of RESET#. For details on configuration, refer to the
S1D13708 Hardware Functional Specification, document number X39A-A-001-xx.
The following table shows the configuration required for this implementation of a
S1D13708 to Motorola MC68VZ328 microprocessor.
Table 4-1: Summary of Power-On/Reset Configuration Options
S1D13708 Pin
Name
value on this pin at the rising edge of RESET# is used to configure: (1/0)
10
CNF[4, 2:0]
1110 = Dragonball Big Endian Host Bus Interface
CNF3 GPIO pins as inputs at power on GPIO pins as HR-TFT / D-TFT outputs
CNF5
Active high WAIT# Active low WAIT#
CNF[7:6] see Table 4-2: “CLKI to BCLK Divide Selection” for recommended settings
= configuration for MC68VZ328 microprocessor
Table 4-2: CLKI to BCLK Divide Selection
CNF7 CNF6 CLKI to BCLK Divide
0 0 1:1
012:1
103:1
1 1 reserved
= recommended setting for MC68VZ328 microprocessor