Filter
Top Products
Page 12 Epson Research and Development
Vancouver Design Center
S1D13708 13708PLAY Diagnostic Utility
X39A-B-002-01 Issue Date: 01/11/16
Script Files
13708PLAY can be controlled by a script file. This is useful when:
• there is no display to monitor command keystroke accuracy.
• various registers must be quickly changed to view results.
A script file is an ASCII text file with one 13708PLAY command per line. Script files can
be executed from within 13708PLAY using the Run command (e.g. = run dumpregs.scr).
Alternately, the script file can be executed from the OS command prompt. On a PC
platform, a typical script command line might be:
13708PLAY run dumpregs.scr > results
This causes the file dumpregs.scr to be interpreted as commands by 13708PLAY and the
results to be redirected to the file results.
Example 1: Create a script file that reads all registers.
; This file initializes the S1D13708 and reads the registers.
; Note: after a semicolon (;), all characters on a line are ignored.
; Initialize the S1D13708
i
; Read all registers
xa