Filter
Top Products
Epson Research and Development Page 15
Vancouver Design Center
13708CFG Configuration Program S1D13708
Issue Date: 01/11/16 X39A-B-001-01
available options are 4, 8, and 16 bit. When an active
panel type (TFT/D-TFD/HR-TFT) is selected, the
available options are 9, 12, and 18 bit.
Mono / Color Selects between a monochrome or color panel.
Format 2 Selects color STN panel format 2. This option only
applies to 8-bit color STN panels.
See the S1D13708 Hardware Functional Specification,
document number X39A-A-001-xx, for a description of
format 1 / format 2 data formats. Most new panels use
the format 2 data format.
Polarity Allows selection of the polarity for the FPLINE and
FPFRAME pulses.
Note
Selecting the wrong pulse polarity may damage
the panel.
FPLINE Polarity Selects the polarity of the FPLINE pulse.
Refer to the panel specification for the correct polarity
of the FPLINE pulse.
FPFRAME Polarity Selects the polarity of the FPFRAME pulse.
Refer to the panel specification for the correct polarity
of the FPFRAME pulse.
Panel Dimensions These fields specify the panel width and height. A
number of common widths and heights are available in
the selection boxes. If the width/height of your panel is
not listed, enter the actual panel dimensions into the edit
field.
For passive panels, manually entered pixel widths must
be a minimum of 32 pixels and can be increased by
multiples of 16. For TFT panels, manually entered pixel
widths must be a minimum of 16 pixels and can be
increased by multiples of 8. If a value is entered that
does not match these requirements, a notification box
appears and 13708CFG rounds up the value to the next
allowable width.
Display Total It is recommended that the automatically generated
Display Total values be used. However, manual
adjustment may be used to improve the quality of the