Filter
Top Products
You will see the power on self-test messages as the fabric interconnect boots.
Step 3
At the installation method prompt, enter gui.
Step 4
If the system cannot access a DHCP server, you are prompted to enter the following information:
• IP address for the management port on the fabric interconnect
• Subnet mask for the management port on the fabric interconnect
• IP address for the default gateway assigned to the fabric interconnect
Step 5
Copy the web link from the prompt into a web browser and go to the Cisco UCS Manager GUI launch page.
Step 6
On the Cisco UCS Manager GUI launch page, select Express Setup.
Step 7
On the Express Setup page, select Initial Setup and click Submit.
Step 8
In the Cluster and Fabric Setup Area:
a) Click the Enable Clustering option.
b) For the Fabric Setup option, select Fabric A.
c) In the Cluster IP Address field, enter the IP address that Cisco UCS Manager will use.
Step 9
In the System Setup Area, complete the following fields:
DescriptionField
The name assigned to the Cisco UCS domain.
In a standalone configuration, the system adds "-A" to the
system name. In a cluster configuration, the system adds
"-A" to the fabric interconnect assigned to fabric A, and
"-B" to the fabric interconnect assigned to fabric B.
System Name field
The password used for the Admin account on the fabric
interconnect.
Choose a strong password that meets the guidelines for
Cisco UCS Manager passwords. This password cannot be
blank.
Admin Password field
The password used for the Admin account on the fabric
interconnect.
Confirm Admin Password field
The static IP address for the management port on the fabric
interconnect.
Mgmt IP Address field
The subnet mask for the management port on the fabric
interconnect.
Mgmt IP Netmask field
The IP address for the default gateway assigned to the
management port on the fabric interconnect.
Default Gateway field
The IP address for the DNS server assigned to the fabric
interconnect.
DNS Server IP field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
70 OL-25712-04
Initial System Setup for a Cluster Configuration