Filter
Top Products
Step 7
In the Email Addresses area, complete the following fields with the email information for Smart Call Home
alert messages:
DescriptionName
The email address that should appear in the From field on Call Home
alert messages sent by the system.
From field
The return email address that should appear in the From field on Call
Home alert messages sent by the system.
Reply To field
Step 8
In the SMTP Server area, complete the following fields with information about the SMTP server that Call
Home should use to send email messages:
DescriptionName
The IP address or hostname of the SMTP server.
If you use a hostname rather than an IP address, you must
configure a DNS server in Cisco UCS Manager.
Note
Host field
The port number the system should use to talk to the SMTP server.
Enter an integer between 1 and 65535. The default is 25.
Port field
Step 9
Click Save Changes.
Configuring the Default Cisco TAC-1 Profile
The following are the default settings for the CiscoTAC-1 profile:
• Level is normal
• Only the CiscoTAC alert group is selected
• Format is xml
• Maximum message size is 5000000
Cisco UCS Manager GUI Configuration Guide, Release 2.0
692 OL-25712-04
Example: Configuring Call Home for Smart Call Home