Filter
Top Products
Managing Service Profiles
Cloning a Service Profile
Procedure
Step 1
In the Navigation pane, click the Servers tab.
Step 2
On the Servers tab, expand Servers > Service Profiles.
Step 3
Expand the node for the organization where you want to create the service profile.
If the system does not include multitenancy, expand the root node.
Step 4
Right-click the service profile you want to clone and select Create a Clone.
Step 5
In the Create Clone From Service Profile dialog box:
a) Enter the name you want to use for the new profile in the Clone Name field.
This name can be between 2 and 32 alphanumeric characters. You cannot use spaces or any special
characters other than - (hyphen), _ (underscore), : (colon), and . (period), and this name must be unique
across all service profiles and service profile templates within the same organization.
This name must be unique within the organization or sub-organization in which you are creating the service
profile.
b) Click OK.
Step 6
Navigate to the service profile you just created and make sure that all options are correct.
Associating a Service Profile with a Server or Server Pool
Follow this procedure if you did not associate the service profile with a blade server or server pool when you
created it, or to change the blade server or server pool with which a service profile is associated.
Procedure
Step 1
In the Navigation pane, click the Servers tab.
Step 2
On the Servers tab, expand Servers > Service Profiles.
Step 3
Expand the node for the organization that contains the service profile that you want to associate with a new
server or server pool.
If the system does not include multitenancy, expand the root node.
Step 4
Right-click the service profile you want to associate with a server and select Change Service Profile
Association.
Step 5
In the Associate Service Profile dialog box, select one of the following options:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
544 OL-25712-04
Managing Service Profiles