Filter
Top Products
You cannot assign a static IP address to a server or service profile if that IP address has already been
assigned to a server or service profile in the Cisco UCS domain. If you attempt to do so, Cisco UCS
Manager warns you that the IP address is already in use and rejects the configuration.
Note
A management IP address that is assigned to a service profile moves with the service profile. If a KVM or
SoL session is active when you migrate the service profile to another server, Cisco UCS Manager terminates
that session and does not restart it after the migration is completed. You configure this IP address when you
create or modify a service profile.
Configuring the Management IP Address on a Blade Server
Configuring a Blade Server to Use a Static IP Address
If this action is greyed out, the server has already been assigned a static IP address.
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Chassis > Chassis Number > Servers.
Step 3
Click the server for which you want to configure an IP address.
Step 4
In the Work pane, click the Inventory tab.
Step 5
Click the CIMC subtab.
Step 6
In the Actions area, click Create/Modify Static Management IP.
Step 7
In the Create/Modify Static Management IP dialog box, complete the following fields:
DescriptionField
The static IPv4 address to be assigned to the server.IP Address
The subnet mask for the IP address.Subnet Mask
The default gateway that the IP address should use.Default Gateway
Step 8
Click OK.
Configuring a Blade Server to Use the Management IP Pool
If this action is greyed out, the server is already configured to use the management IP pool.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
374 OL-25712-04
Configuring the Management IP Address on a Blade Server