Filter
Top Products
Activating a Traffic Monitoring Session
This procedure describes how to activate an Ethernet traffic monitoring session. To activate a Fibre Channel
monitoring session, select the SAN tab instead of the LAN tab in Step 2.
Note
Before You Begin
A traffic monitoring session must be created.
Procedure
Step 1
In the Navigation pane, click the LAN tab.
Step 2
On the LAN tab, expand LAN > Traffic Monitoring Sessions > Fabric_Interconnect_Name.
Step 3
Expand Fabric_Interconnect_Name and click the monitor session that you want to activate.
Step 4
In the Work pane, click the General tab.
Step 5
In the Properties area, click the enabled radio button for Admin State.
Step 6
Click Save Changes.
If a traffic monitoring source is configured, traffic begins to flow to the traffic monitoring destination port.
Deleting a Traffic Monitoring Session
This procedure describes how to delete an Ethernet traffic monitoring session. To delete a Fibre Channel
monitoring session, select the SAN tab instead of the LAN tab in Step 2.
Note
Procedure
Step 1
In the Navigation pane, click the LAN tab.
Step 2
On the LAN tab, expand LAN > Traffic Monitoring Sessions > Fabric_Interconnect_Name.
Step 3
Expand Fabric_Interconnect_Name and click the monitor session that you want to delete.
Step 4
In the Work pane, click the General tab.
Step 5
In the Actions area, click the Delete icon.
Step 6
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
646 OL-25712-04
Activating a Traffic Monitoring Session