Filter
Top Products
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Fabric Interconnects > Fabric_Interconnect_Name.
Step 3
In the Work pane, click the General tab.
Step 4
In the Actions area of the General tab, click one of the following links:
• Set Fibre Channel Switching Mode
• Set Fibre Channel End-Host Mode
The link for the current mode is dimmed.
Step 5
In the dialog box, click Yes.
Cisco UCS Manager restarts the fabric interconnect, logs you out, and disconnects Cisco UCS Manager GUI.
Changing the Properties of the Fabric Interconnects
To change the subnet for a Cisco UCS domain, you must simultaneously change all subnets, the virtual
IP address used to access Cisco UCS Manager, and the IP addresses for all fabric interconnects.
Note
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, click All.
Step 3
In the Work pane, click the General tab.
Step 4
In the Actions area, click Management Interfaces to open the Management Interfaces dialog box.
Step 5
To change only the virtual IP address that you use to access Cisco UCS Manager, enter the desired IP address
in the IP Address field in the Virtual IP area.
Step 6
To change only the name assigned to the Cisco UCS domain, enter the desired name in the Name field in the
Virtual IP area.
Step 7
To change the subnet, IP address, and default gateway assigned to the fabric interconnects, update the following
fields:
a) In the Virtual IP area, change the IP address used to access Cisco UCS Manager in the IP Address field.
b) In the Fabric Interconnect area for each fabric interconnect, update the following fields:
DescriptionName
The IP address to use when communicating with the fabric
interconnect.
IP Address field
The associated subnet mask.Subnet Mask field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 75
Changing the Properties of the Fabric Interconnects