Filter
Top Products
Procedure
Step 1
In the LAN Uplinks Manager, click the LAN Uplinks tab.
Step 2
In the Ports area, click the down arrows to expand the Unconfigured Ports section.
Step 3
Expand Fabric Interconnects > Fabric_Interconnect_Name .
Step 4
Expand one of the following:
• Fixed Module—To configure a port in the fixed module as a server port or an uplink Ethernet port.
• Expansion Module Number —To enable a port in an expansion module as an uplink Ethernet port.
You cannot configure ports in expansion modules as server ports.
If no ports are listed below the node that you expanded, all ports in that module have already been configured.
Step 5
Right-click the port that you want to configure and choose one of the following:
• Configure as Server Port
• Configure as Uplink Port
Step 6
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Configuring Server Ports
Enabling a Server Port with the LAN Uplinks Manager
This procedure assumes that the port has been configured as a server port, but is disabled.
Procedure
Step 1
In the LAN Uplinks Manager, click the LAN Uplinks tab.
Step 2
In the Ports area, click the down arrows to expand the Server Ports section.
Step 3
Expand Fabric Interconnects > Fabric_Interconnect_Name .
Step 4
Right-click the port that you want to enable and choose Enable.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 265
Configuring Server Ports