Filter
Top Products
This name can be between 1 and 16 alphanumeric characters. You cannot use spaces or any special characters
other than - (hyphen), _ (underscore), : (colon), and . (period), and you cannot change this name after the
object has been saved.
Step 9
(Optional) To reboot all servers that use this boot policy after you make changes to the boot order, check the
Reboot on Boot Order Change check box.
In the Cisco UCS Manager GUI, if the Reboot on Boot Order Change check box is checked for a boot
policy, and if CD-ROM or Floppy is the last device in the boot order, deleting or adding the device does not
directly affect the boot order and the server does not reboot.
Step 10
(Optional) If desired, check the Enforce vNIC/vHBA/iSCSI Name check box.
• If checked, Cisco UCS Manager displays a configuration error and reports whether one or more of the
vNICs, vHBAs, or iSCSI vNICs listed in the Boot Order table match the server configuration in the
service profile.
• If not checked, Cisco UCS Manager uses the vNICs, vHBAs, or iSCSI vNICs (as appropriate for the
boot option) from the server configuration in the service profile. It does not report whether the vNICs,
vHBAs, or iSCSI vNICs specified in the boot policy match the server configuration in the service profile.
Step 11
To add a local disk, virtual CD-ROM, or virtual floppy to the boot order, do the following:
a) Click the down arrows to expand the Local Devices area.
b) Click one of the following links to add the device to the Boot Order table:
• Add Local Disk
• Add CD-ROM
• Add Floppy
c) Add another boot device to the Boot Order table, or click OK to finish.
Step 12
To add a LAN boot to the boot order, do the following:
a) Click the down arrows to expand the vNICs area.
b) Click the Add LAN Boot link.
c) In the Add LAN Boot dialog box, enter the name of the vNIC that you want to use for the LAN boot in
the vNIC field, then click OK.
d) Add another device to the Boot Order table, or click OK to finish.
Step 13
To add a SAN boot to the boot order, do the following:
a) Click the down arrows to expand the vHBAs area.
b) Click the Add SAN Boot link.
c) In the Add SAN Boot dialog box, complete the following fields, and click OK:
DescriptionName
Enter the name of the vHBA you want to use for the SAN boot.vHBA field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 551
Managing Service Profiles