Filter
Top Products
Creating a One Time Occurrence for a Schedule
By default, the maximum duration and the maximum number of tasks are set to none. If you do not change
either of these defaults, Cisco UCS Manager does not impose any limit to the length of time that the
maintenance window lasts. All pending activities are applied as soon as the scheduled maintenance window
begins, and Cisco UCS Manager continues to reboot the servers impacted by the pending activities until
all of those tasks are complete.
Note
Procedure
Step 1
In the Navigation pane, click the Servers tab.
Step 2
On the Servers tab, expand Schedules.
Step 3
Right-click the schedule to which you want to add an occurrence and choose Create a One Time Occurrence.
Step 4
In the Create a One Time Occurrence dialog box, complete the following fields:
DescriptionName
The name of the one time occurrence of this schedule.
This name can be between 1 and 16 alphanumeric characters. You
cannot use spaces or any special characters other than - (hyphen), _
(underscore), : (colon), and . (period), and you cannot change this name
after the object has been saved.
Name field
The date and time that the occurrence will run.
Click the down arrow at the end of the field to select the date from a
calendar.
Start Time field
Step 5
Click the down arrows to expand the Options area.
Step 6
In the Options area, complete the following fields:
DescriptionName
The maximum length of time that the scheduled occurrence can run.
This can be one of the following:
• None—The occurrence runs until all tasks are completed.
• other—Cisco UCS Manager GUI displays the dd:hh:mm:ss field
allowing you to specify the maximum amount of time that the
occurrence can run. Cisco UCS completes as many scheduled
tasks as possible within the specified time.
By default, the maximum duration is set to none. If you do not change
this setting and you do not set a maximum number of tasks, the
maintenance window continues until all pending activities are completed.
Max Duration field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 477
Configuring Schedules