Filter
Top Products
DescriptionName
The system-assigned priority for the iSCSI target.Priority field
The port associated with the iSCSI target.
Enter an integer between 1 and 65535. The default is 3260.
Port field
The name of the associated authentication profile.Authentication Profile
drop-down list
Click this link to create a new authentication profile policy that will
be available to all iSCSI vNICs.
Create Authentication Profile
link
The IPv4 address assigned to the iSCSI target.IPv4 Address field
The LUN identifier in the iSCSI target.LUN Id field
• To delete an iSCSI target interface, select the iSCSI target interface that you want to delete and click
Delete.
If you have two iSCSI static targets and you delete the first priority target, the second priority target
becomes the first priority target, although Cisco UCS Manager still shows it as the second priority
target.
Note
Step 15
If you chose iSCSI Auto Target Interface, change the entry to either the initiator name or the DHCP vendor
ID in the DHCP Vendor Id field. The initiator must have already been configured. The vendor ID can be up
to 32 alphanumeric characters.
Step 16
Click OK.
IQN Pools
An IQN pool is a collection of iSCSI Qualified Names (IQNs) for use as initiator identifiers by iSCSI vNICs
in a Cisco UCS domain.
IQN pool members are of the form prefix:suffix:number, where you can specify the prefix, suffix, and a block
(range) of numbers.
An IQN pool can contain more than one IQN block, with different number ranges and different suffixes, but
sharing the same prefix.
Creating an IQN Pool
In most cases, the maximum IQN size (prefix + suffix + additional characters) is 223 characters. When
using the Cisco UCS NIC M51KR-B adapter, you must limit the IQN size to 128 characters.
Note
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 461
iSCSI Boot