Filter
Top Products
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
In the Equipment tab, expand the Equipment node.
Step 3
Click the Chassis node.
Step 4
In the Work pane, click the Decommissioned tab.
Step 5
For the chassis that you want to recommission, do the following:
a) Right-click the chassis and choose Re-commission Chassis.
b) In the Chassis ID field of the Re-commission Chassis dialog box, type or use the arrows to choose the
ID that you want to assign to the chassis
c) Click OK.
Step 6
If Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
This procedure may take several minutes to complete. After the chassis has been recommissioned, Cisco UCS
Manager runs the chassis discovery policy and adds the chassis to the list in the Navigation pane.
Recommissioning Multiple Chassis
This procedure returns the chassis to the configuration and applies the chassis discovery policy to the chassis.
After this procedure, you can access the chassis and any servers in it.
You cannot renumber the chassis when you recommission multiple chassis at the same time. Cisco UCS
Manager assigns the same ID that the chassis had previously.
Note
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
In the Equipment tab, expand the Equipment node.
Step 3
Click the Chassis node.
Step 4
In the Work pane, click the Decommissioned tab.
Step 5
In the row for each chassis that you want to recommission, check the Re-commission check box.
Step 6
Click Save Changes.
Step 7
If Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
This procedure may take several minutes to complete. After the chassis has been recommissioned, Cisco UCS
Manager runs the chassis discovery policy and adds the chassis to the list in the Navigation pane.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
580 OL-25712-04
Recommissioning Multiple Chassis