Filter
Top Products
b) In the VLANs area, use the table to select the VLAN to assign to vNICs created from this template. The
table contains the following columns:
DescriptionName
Check the check box in this column for each VLAN that you want
to use.
Select column
The name of the VLAN.Name column
To designate one of the VLANs as the native VLAN, click the radio
button in this column.
Native VLAN column
Click this link if you want to create a VLAN.Create VLAN link
c) In the Policies area, complete the following fields:
DescriptionName
The maximum transmission unit, or packet size, that vNICs created
from this vNIC template should use.
Enter an integer between 1500 and 9216.
If the vNIC template has an associated QoS policy, the MTU
specified here must be equal to or less than the MTU
specified in the associated QoS system class. If this MTU
value exceeds the MTU value in the QoS system class,
packets may be dropped during data transmission.
Note
MTU field
The MAC address pool that vNICs created from this vNIC template
should use.
MAC Pool drop-down list
The quality of service policy that vNICs created from this vNIC
template should use.
QoS Policy drop-down list
The network control policy that vNICs created from this vNIC
template should use.
Network Control Policy
drop-down list
The LAN pin group that vNICs created from this vNIC template
should use.
Pin Group drop-down list
The statistics collection policy that vNICs created from this vNIC
template should use.
Stats Threshold Policy
drop-down list
Step 6
Click OK.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
310 OL-25712-04
Configuring vNIC Templates