Filter
Top Products
a) Use one or more of the following buttons to adjust the order of the vNICs and vHBAs:
DescriptionName
Moves the selected vNIC or VHBA to a higher
priority in the list.
Move Up button
Moves the selected vNIC or vHBA to a lower
priority in the list.
Move Down button
Deletes the selected vNIC or vHBA.Delete button
Returns all vNICs and vHBAs to their original
order.
Reorder button
Enables you to modify the currently-selected vNIC
or vHBA.
You can change any options for the vNIC
or vHBA except its name.
Note
Modify button
b) Continue with Step 5.
Step 3
(Optional) If you chose Specify Manually, do the following:
a) On the appropriate tab in the vNIC/vHBA table, click a vNIC or vHBA.
b) In the Virtual Host Interface table, click a vCon row and if necessary, choose one of the following values
from the Selection Preference column:
• All—All configured vNICs and vHBAs can be assigned to the vCon, whether they are explicitly
assigned to it, unassigned, or dynamic.
• Assigned Only—vNICs and vHBAs must be explicitly assigned to the vCon. You can assign them
explicitly through the service profile or the properties of the vNIC or vHBA.
• Exclude Dynamic—Dynamic vNICs and vHBAs cannot be assigned to the vCon. The vCon can be
used for all static vNICs and vHBAs, whether they are unassigned or explicitly assigned to it.
• Exclude Unassigned—Unassigned vNICs and vHBAs cannot be assigned to the vCon. The vCon
can be used for dynamic vNICs and vHBAs and for static vNICs and vHBAs that are explicitly
assigned to it.
c) Click Assign.
If you need to undo an assignment, click Remove.
d) Repeat Steps a through c until you have assigned all vNICs and vHBAs.
e) When you have specified all vNIC and vHBA placements, continue with Step 5.
Step 4
If you clicked Create Placement Policy, do the following in the Create Placement Policy dialog box:
a) In the Name field, enter a unique name for the placement policy.
This name can be between 1 and 16 alphanumeric characters. You cannot use spaces or any special
characters other than - (hyphen), _ (underscore), : (colon), and . (period), and you cannot change this name
after the object has been saved.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 531
Working with Service Profile Templates