Filter
Top Products
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Chassis > Chassis Number > Servers.
Step 3
Click the server that you want to configure to use the management IP pool.
Step 4
In the Work pane, click the Inventory tab.
Step 5
Click the CIMC subtab.
Step 6
In the Actions area, click Use Pooled Management IP.
Step 7
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Step 8
Click OK.
Configuring the Management IP Address on a Rack Server
Configuring a Rack Server to Use a Static IP Address
If this action is greyed out, the server has already been assigned a static IP address.
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Rack Mounts > Servers.
Step 3
Click the server for which you want to configure an IP address.
Step 4
In the Work pane, click the Inventory tab.
Step 5
Click the CIMC subtab.
Step 6
In the Actions area, click Create/Modify Static Management IP.
Step 7
In the Create/Modify Static Management IP dialog box, complete the following fields:
DescriptionField
The static IPv4 address to be assigned to the server.IP Address
The subnet mask for the IP address.Subnet Mask
The default gateway that the IP address should use.Default Gateway
Step 8
Click OK.
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 375
Configuring the Management IP Address on a Rack Server