Filter
Top Products
Updating the Capability Catalog from a Remote Location
You cannot perform a partial update to the Capability Catalog. When you update the Capability Catalog, all
components included in the catalog image are updated.
A B-series server bundle includes the Capability Catalog update for that server. You do not need to download
a separate Capability Catalog update. You only need to activate the Capability Catalog update.
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, expand All.
Step 3
Click the Capability Catalog node.
Step 4
In the Work pane, click the Catalog Update Tasks tab.
Step 5
Click Update Catalog.
Step 6
In the Update Catalog dialog box, click the Remote File System radio button in the Location of the Image
File field.
Step 7
Complete the following fields:
DescriptionName
The protocol to use when communicating with the remote server. This
can be one of the following:
• FTP
• TFTP
• SCP
• SFTP
Protocol field
The IP address or hostname of the remote server on which the catalog
image resides.
Server field
The name of the catalog executable you want to download.Filename field
The absolute path to the catalog image file on the remote server, if
required.
If you use SCP, the absolute path is always required. If you use any
other protocol, you may not need to specify a remote path if the file
resides in the default download folder. For details about how your file
server is configured, contact your system administrator.
Path field
The username the system should use to log in to the remote server. This
field does not apply if the protocol is TFTP.
User field
The password for the remote server username. This field does not apply
if the protocol is TFTP.
Password field
Cisco UCS Manager GUI Configuration Guide, Release 2.0
234 OL-25712-04
Managing the Capability Catalog