Filter
Top Products
Step 4
Choose the rack-mount server that you want to renumber.
Step 5
On the Equipment tab, click the Rack-Mounts node.
Step 6
In the Work pane, click the Decommissioned tab.
Step 7
On the row for each rack-mount server that you want to renumber, do the following:
a) Double-click in the ID field, and enter the new number that you want to assign to the rack-mount server.
b) In the Recommission column, check the check box.
c) Click Save Changes
Step 8
If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
Step 9
(Optional) Monitor the progress of the server recommission and discovery on the FSM tab for the server.
Removing a Non-Existent Rack-Mount Server from the Configuration Database
Perform the following procedure if you physically removed the server hardware without first decommissioning
the server. You cannot perform this procedure if the server is physically present.
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Rack Mounts > Servers.
Step 3
Choose the server that you want to remove from the configuration database.
Step 4
In the Work pane, click the General tab.
Step 5
In the Actions area, click Server Maintenance.
Step 6
In the Maintenance dialog box, do the following:
a) Click Remove.
b) Click OK.
Cisco UCS Manager removes all data about the server from its configuration database. The server slot is now
available for you to insert new server hardware.
Turning the Locator LED for a Rack-Mount Server On and Off
Procedure
Step 1
In the Navigation pane, click the Equipment tab.
Step 2
On the Equipment tab, expand Equipment > Rack Mounts > Servers.
Step 3
Choose the server for which you want to turn the locator LED on or off.
Step 4
In the Work pane, click the General tab.
Step 5
In the Actions area, click one of the following:
Cisco UCS Manager GUI Configuration Guide, Release 2.0
OL-25712-04 607
Removing a Non-Existent Rack-Mount Server from the Configuration Database